MX R10

Description

For a fully multipurpose, more cost-effective tractor! As well as the rear linkage, MX Front Linkages enable 2 implements to be attached to the tractor. With this combination, you can perform two operations in just one sweep! Results: maximum performance with less mechanical effort.

Capacity

  • Front linkage category – 2
  • Lifting power at the ends of the lifting arms* (in kg) – 1,000
  • Theoretical arm spacing between ball joints (in mm) – 825

Advantages

  • SHARED COMPONENTS: A HIGHLY ECONOMICAL SOLUTION
    The chassis, rear supports, control, hydraulic control valve and shock absorber are all common to MX loaders and front linkages. With the MX loader/MX front linkage combination, the loader bracket substitutes for the linkage chassis.
  • ARM WITH 3 POSITIONS:
    Fixed work position – Floating work position: allows ground contour to be followed (e.g. front mower) – Transport position
  • PROTECTED PIVOT POINTS Pins with accessible integral grease nipples. Bi-metal wear bushes for a longer service life.

Specifications

Detailed Specifications
MX R10
Front linkage category
2
Lifting power at the ends of the lifting arms* (in kg)
1000
Lifting power – centre of gravity 610 mm in front of the ball joints* (kg)
770
Theoretical arm spacing between ball joints (in mm)
825
Height of lift arms from ground* in lowered position (in mm) (1)
< 200
Height of lift arms from ground* in high position (in mm) (2)
> 850
Hitching hands
auto. Cat 3 S
Heads
Cat 3 / 2 (D=64mm / d=28.4mm)
3rd point bar / length
Cat 2 / 460 – 680
Max power pdf (hp)
150
Output speed pdf (in rpm)
1000
Clockwise rotation (seen from the tractor seat)
Series
Output shaft profile (din 9611) / Number of splines
1’ 3/8’’ – 6

Brochure

MX R10

Featured Categories

Find the right implement for the job

Connect with our established Australian dealer network to find the right implements to suit your operation.